TFK spare part/ brake cable

This TFK spare part is the brake cable for Joggster 3 and Twist.

Instructions from the manufacturer: First, hang the hooks with the small cables on the rear axle. Then open the 4 small screws on the rear axle and lift off the cover. Remove the plastic parts and the spring. Connect the old and the new brake cable with a cord. Make sure you use the piece with the ball. This belongs to the top (later on the brake handle). Remove the cable ties from the old brake cable. Pull out the old cable from above. In doing so, the new is going to go through. Now turn the screw on the brake handle and remove it through the slot in the screw. Remove the end piece (ball) of the old brake cable. Now slide the ball from the new brake handle. If pushing is difficult, you can also use a screwdriver to help. Now insert the "old" screw over the slot and turn it into the brake lever. (Be careful not to screw in the brake cable and possibly damage it.) Now, at the bottom of the axle, join the two plastic parts and the spring together and reattach the silver cover. Screw back the cover with the 4 screws. Place the plastic hooks on the left and right..

Compatible with

:: Joggster Twist

:: Joggster 3

:: Joggster from 2008 (models in front have an additional adjusting screw - then please order TFK brake cable universal)